Ancient Aliens on Mars: Curiosity Spotted Carved Animal Statue and Strange Artifacts

140,000 Year Old UFO Discovered – The Baltic Sea Anomaly

Manual for Installation of Voice over the Internet Protocol (VoIP)

Manual for Installation of Voice over the Internet Protocol (VoIP)

Arris TM502G Phone/EMTA Modem.

Introduction

The following manual can be used to set up “VoIP” in each of the following system: ATT VoIP, Xfinity VoIP. Also, it could be used in any type of device that uses the technology (Voice over Internet Protocol) and has a phone line available. The installation requires a medium level of expertise and understanding of telephone wiring to complete this task.

Warning:

Failure to follow each of the steps; might result in an unsuccessful activation of your phone service. In the case of alarm set up, it could result in the creation of an isolation network where you alarm system is completely disconnected from the telephone network.

What is VoIP?

VOIP is an acronym of the phone service identified as “Voice over Internet Protocol”. (Communications technology for carrying voice telephone traffic over data network such as the Internet. VoIP uses the Internet Protocol (IP)-one half of the Transmission Control Protocol (TCP/IP), a global addressing system for sending and receiving packets of data over the Internet.

VoIP works by converting sound into a digital signal, which is then sent over a data network such as the Internet. The conversion is done by a device, such as a personal computer (PC) or special VoIP phone, that has a high-speed, or broadband, Internet connection. The digital signal is routed through the network to its destination, where a second VoIP device converts the signal back to sound. Because of the digital nature of VoIP, call quality is normally much higher than that of a standard telephone. Another advantage is that VoIP frequently costs less than standard telephone and long-distance service.) VoIP. (2014). In Encyclopaedia Britannica

What is EMTA?

EMTA is an acronym to the term “Embedded Multimedia Terminal Adapter”. This is a combination of cable modem and telephone adapter.

Glossary of Terms:

The following types of wires are currently found in old and new constructions and their proper identification is necessary to properly connect them:

Cat3: Heavily used in the 90’s for wiring homes and offices. As a result it is still present in old homes.

Cat5: Their usage commenced around the year 2000. It is the standard cable used in offices and homes.

Illustration of how to connect cat5 to cat3.

NID: Acronym for “Network Interface Device”. It is always located next to your power line meter equipment.

Scotch lock (use to connect and splice phone wires).

Network Interface Device (also referred to as EBM by technicians).

RJ11 Modular Single Port Surface Mount Jack.

List of required tools/equipment:

·         EMTA (embedded multimedia terminal adapter) Modem with line1 for dial tone services

·         1 Box Cat-5e

·         1 3M scotch lock hand crimping tool with step jaws and long nose /crimping pliers

·         50 units Scotch lock “gel filled” 3 port connectors

·         1 Wire striper

·         1 Flat #1 screw driver

·         1 Phillip #1 screw driver

·         1 Professional scissors for wires

·         Tone generator line tracer tester tone with amplifier probe kit

·         But-set and a modular adapter

Fig 1 Homerun feed (preferred inside wiring (IW) phone network connection)

Instructions:

·         Connect the EMTA to the signal and power up.

·         Wait for all the light to be on, wait for line 1 to be on.

·         Plug the but-set on line1 located behind the EMTA.

·         Check and wait for the dial tone behind the EMTA or gateway

·         Activate dial tone by calling the IVR 1-800 number.

·         Check dial tone with your but set. (If no dial tone; continue to troubleshooting guide).

·         Run test by calling in/out from the EMTA or gateway.

·         If test went successfully continue with the following step below.

·         Here you can have two different ways to finish the installation (simple telephone network installation: base phone set straight connect to the EMTA and its station base around the house) or (advanced network: following the procedure that will continue next).

·         Run a cat5 wire from the room located the EMTA to the NID.

·         If no phone jack present. Install an rj11 jack and connect the blue wire to the new jack.

·         Connect the new jack to the EMTA using an RJ11 Modular Telephone cable.

·         Go to the NID and disconnect the NID from external cable (ASW) to isolate the phone network only to the inside network. (Fig 3 y 4)

·         Disconnect the ASW from the EBM and use the wire from the EBM (green /red) to connect to the cat5 (blue and white blue) refer to fig 6.

·         Connect all jacks that you wish to activate to the EBM (EBM hold up to four lines) Fig 4. For more lines to be activated follow the tutorial of “how to splice and connect IW using schlock “refer to fig 5.

(Fig 5) Proper procedure of how to splice a jack to a single feed.

(Fig 2) Inside wires connected to the NID.

(Fig 3) ASW identification.

(Fig 4) ASW identification and proper cut.

(Fig 6) Identification of most common part inside the NID.

·         Connect the test phone in each phone jack and check for dial tone.

·         Run test by calling in/out for each phone number.

·         While calling, listen for static, noise in the line, delay in the call, gap in the voice, dropping call, or ring too low or almost impossible to hear. (If one of these problem appear on the phone service. Refer to troubleshooting guide technician to aim for a better resolution).

(Problems of interference and attenuation

Two-wire copper circuits did not solve all the problems of long-distance telephony, however. As the number of lines grew, interference (or cross talk) from adjacent lines on the same crossarm of telephone pole became significant. It was found that transposing the wires by twisting them at specified intervals canceled the cross talk. ) telephone. (2014). In Encyclopaedia Britannica.

If alarm is present. Follow next steps

Today’s technology makes it easy for a non-expert to do the installation. Leader Security Companies are now using GSM Modules that connect their systems to cellular antennas to communicate with cell towers over wireless networks such as our cellular phones. That makes it a very independent system capable of receiving updates, proper calibration and call for emergency services; this type of technology does not need a landline as it used to need in the past. Also, it has a very reliable connectivity that is worth of its price (fig 7). However, there are cases when the expert is needed to proper wired an old alarm system.

(Fig 7) GSM Module for Alarm System (it eliminates the need of a land-line requirements)

Old system alarm work with plain line telephone service and they need to receive a dial tone in order to communicate with the emergency system such as 911 or police department.

So, this is our job. Make sure the alarm system has dial tone after a successful VoIP installation. This job is normally done by an alarm technician who has previously run the cable and leaves everything connected and working. In the other hand after we take over from another phone provider, we as technicians have to guarantee that all services remain as we found them before our visit. Additionally, it is very important to know the compatibility of this alarm with our new phone service. And further questions are needed to properly proceed with our installation.

Instructions for Wiring an Alarm Panel with VoIP.

·         Identify the wire that goes to the alarm panel by a tone/searching method. If no wiring existing or bad wire preexist. Follow the guide to proper wire the alarm panel.

·         Create a back feed this way (send dial tone to the rj31x using the cat3 green/red wires or the cat5 blue/white blue wires).

·         Connect to the tips 4 and 5 in the rj31x matching the picture below.

·         Take the second pair of wires to return the dial tone back to the NID.

·         Connect the following color black/yellow from the cat3 or orange/white orange from the cat5 to the tips 1 and 8 from the rj31x. Refer to fig 7, 8, and 11

(Fig 11) Proper Connection for Medical Alert Monitoring System

Additional Components

RJ31X

 (Fig 8) Proper Wiring for the Distribution rj31x

(Fig 9) Alarm Panel

(Fig 11) cat5 connected to the rj31x

(Fig 10) Telephone Network Alarm System

The cat5 blue is the new wire that runs from the NID to the alarm panel were blue and orange wires are connected to 4-5 and 1-8 refer to fig 12

(Fig 12) pins 1-8

AutoChessInc©

Reviewed December 2014 ©

THIS INFORMATIVE MANUAL IS FOR SHARING OVER THE INTERNET;BUT REMEMBER TO INCLUDE THE AUTHOR PAGE AND THIS BACK LINK AS REFERENCE AND TO RESPECT THE PUBLISHER HONOR FOR HIS JOB

Reference:

http://voip.mi-telecom.org/

http://www.slideshare.net/vedard_alarms/ks-858-e-intelligent-network-alarm-systems-panel-users-manual

VoIP. (2014). In Encyclopaedia Britannica. Retrieved from http://academic.eb.com/EBchecked/topic/1017653/VoIP

telephone. (2014). In Encyclopaedia Britannica. Retrieved from http://academic.eb.com/EBchecked/topic/585993/telephone

Controlled Remote Viewing:

Weekend Edition   January 12, 2015   Coast Insider Audio
Controlled Remote Viewing:

On Sunday night's program, host Connie Willis (email) welcomed Executive Director of Problems>Solutions>Innovations (P>S>I), Lyn Buchanan , for a discussion on Controlled Remote Viewing and his time as one of the original psychic spies. He explained that the practice is called 'Controlled Remote Viewing' because "the viewer has control over her or her own abilities." As such, Buchanan clarified that, as an RV instructor, he is not teaching students how to be psychic, since the ability is already present within the subconscious mind. On the contrary, he said, instructors help prospective viewers to develop a "line of communication" with the latent psychic ability and to learn how to "use the body as a translator" for this exchange via perceptions like sight, smell, and taste. 

In detailing how time does not exist during remote viewing, Buchanan shared the story of being hired as a consultant by a lunar exploration company which sought information on how to build a temporary moon base. Since he did not want his team of viewers to simply invent their own solution to this problem, he had them look ahead to a future time when the shelter has already been built and he recorded their descriptions of this structure. The temporary moon base which exists in the future, he said, consists of a massive sheet of Mylar that is stretched over a small crater and uses only sixteen pounds of air pressure to maintain a safe environment inside. Buchanan laughed that, after submitting the information to the company, "they were just overwhelmed by how smart we were" for ostensibly solving the daunting engineering challenge. 

One troubling application for remote viewing, which Buchanan detailed, is the ability to enter into a person's mind. He expressed displeasure with such a task, since it reveals a wealth of personal information about the target which can be unsettling to an unsuspecting viewer. Additionally, he warned that, after going into someone's mind, the viewer can unknowingly acquire the traits or plans of their target. To that end, he recalled being tasked with looking into the mind of a foreign military leader to determine their "plans and intentions." On the way home, Buchanan was musing about chores he needed to do that weekend and, while listing them in his mind, he was shaken to realize that he'd nonchalantly included "kill my wife" among them. Eerily, the wife of the foreign military leader would go on to die under mysterious circumstances that very weekend. 

http://www.crviewer.com/index.php

Quem são os Illuminati? Melhor explicação

Chess endgame Nalimov download links

chess endgame Nalimov egtb

  Using electronic databases endgame chess, chess program at any stage of the chess endgame knows won the chess position, no man or lost, and how many moves you need to complete the game of chess. Chess endgame databases are known as "Tablebases" and are, as a rule, in a staggered format Nalimov (Nalimov table). Nalimov`s tables (Nalimov) - is the most common version of a universal chess endgame databases. His recognize and use all the leading world chess programs for playing chess. In addition, there is an individual format Nalimov endgame chess database, created exclusively for their authors chess programs. The most famous of them - it Tablebases for chess program Shredder, Scorpio, Gaviota. Appeal to the chess database Tablebases significantly increases the strength of the game of chess chess program in the endgame. First select a chess engine parameters "Use Tablebases" and set the path to Tablebases configuration Shamkhani engine, you get a completely accurate assessment of chess endgame positions. Use electronic chess endgame databases to practice the game of chess in the endings of games of chess and learning chess endgame positions difficult. Even the best experts on the game of chess can not give you a more skilled help than the one you get by using electronic chess endgame databases. On this page you can download the most famous chess endgame electronic database for playing chess online for 3-4-5 curly endings.

File archiver 7-Zip File Manager download

p / p	Endgame	Figures	Size	Download
1	Nalimov table	3-4	29,4 MB	Download
2	Nalimov table	3-4-5	220 files 7,03 GB	Download
3	EGBB Scorpio	3-4	4,35 MB	Download
4	EGBB Scorpio	3-4-5	322 MB	Download
5	Shredder all345.tbe	3-4-5	157 MB	Download
6	Gaviota EGTB	3-4-5	6,8 GB	Download

Download links:

https://sites.google.com/site/chess2u/Nalimov-Endgame-Tablebases

http://kirill-kryukov.com/chess/tablebases-online/

https://chessprogramming.wikispaces.com/Nalimov+Tablebases

http://en.wikipedia.org/wiki/Endgame_tablebase

http://www.cruxis.com/chess/manual/index.html?gaviota_end_game_table_bases.htm

http://auto-chess.blogspot.com/2012/11/download-nalimov-end-game-tablebases-2.html
http://chessmotor.narod.ru/tablebase.html

Autochess gift