MTU Ping Test
A series of ping tests using the command, ping www.expedient.net -f -l xxxx, where xxxx is the packet size, can be used to determine the optimal MTU for your connection.
- Go to Start and select Run.
- Type in cmd (Windows 2000/XP) or command (Windows 98/ME) into the Open: field. Hit the enter key or click OK. The DOS prompt should open.
- At the DOS prompt, type in ping www.expedient.net -f -l 1492 and hit the Enter key.
- Note the results above indicate that the packet needs to be fragmented. Lower the size the packet in increments of +/-10 (e.g. 1472, 1462, 1440, 1400) until you have a packet size that does not fragment.
- Begin increasing the packet size from this number in small increments until you find the largest size that does not fragment. Add 28 to that number (IP/ICMP headers) to get the optimal MTU setting. For example, if the largest packet size from ping tests is 1462, add 28 to 1462 to get a total of 1490 which is the optimal MTU setting.
- Change the MTU using DrTCP or editing the registry. See MTU Settings for further information.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.